Seaga INF4C - Customizing Space to Sales Settings

28Revision 2.EL950 1.3.1074C 18.6

Now that you have chosen a Space to Sales seng – Whole Row, Half Row, By 2’s, Whole Machine, you
must tell the vending machine which selecon is under Space to Sales and which selecons are to work
together.
Back to our example of 16 oz. boled water in 150 and 151, we have used the StS menu (4 > 8) to set By
2’s. In this menu, we would set Selecon 150 to link up 150 and 151.
STEP DISPLAY
1 Press Service Mode Buon Motor Count or Error Code **
2 Press 4 for Conguraon Conguraon
3 Press 8 for StS StS --: (Current seng) *-Exit, no change 8-Edit
4 Press 8 to toggle to your seng (in
our example, By 2’s)
StS By 2’s *-Exit, no change # to Save
5 Press * to return to Conguraon
menu
Conguraon
6 Press 9 to go to Custom Space to
Sales
StS ---: *-Exit
7 Enter Selecon (in our example,
150)
StS XXX: *-Exit, no change # to Save 1 to Clear?
8 Press 1 to clear links menu XXX: Clear links? *-Exit, no change # to Clear?
9 Press # to clear current links
sengs
XXX: Cleared *-Exit, no change # Add 1 – Clear
10 Press # to add new selecon XXX:--- *-Exit, no change
11 Enter next selecon XXX:YYY (in our example, 150) *-Exit, no change # Add
12 Press # to add another selecon
(to enter more selecons, repeat
steps 10 and 11)
XXX:YYY, ZZZ (In our example, 151) The display shows the
selecons you have entered. Aer 3 selecons, the screen
will scroll all the links you have made.
13 Press * two mes to exit 0.00