Seaga INF4C - Multi Vend Feature Configuration; Free Vend Mode Activation

32Revision 2.EL950 1.3.1074C 18.6
MULTI VEND
Allows the customer to purchase more than one product if enough credit has been deposited. When Mul
Vend is acve, any credit remaining aer a vend is NOT automacally returned. The customer makes the
choice to make another selecon (with sucient credit), make further payment to make another selecon
or press the coin return to return any remaining credit.
NOTE: Aer 5 minutes, any credit remaining will be erased by the machine. For card reader sessions, the
Mul Vend feature will funcon only if the card reader supports mulple vend capability.
NOTE: If Fast Change is set to ON, it will over ride MulVend and change will be made immediately aer a
selecon.
FREE VEND
Sets the WHOLE MACHINE to Free Vend. Every product is at no cost, no money is accepted by the machine
and the display reads “FREE ON US”.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 3 for Mul Vend Menu Mul Vend (Current Seng) *-Exit 3-Edit
4. Press 3 to toggle between ON and OFF Mul Vend (Choice Flashing) * Exit #-Save
5. Press # to save the seng Mul Vend (New Seng) *-Exit 3-Edit
6. Press * three mes to exit 0.00
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 4 for FreeVend Menu Free Vend (Current Seng) *-Exit 4-Edit
4. Press 4 to toggle between ON and OFF Free Vend (Choice Flashing) *-Exit #-Save
5. Press # to save the seng Free Vend (New Seng) *-Exit 4-Edit
6. Press * three mes to exit 0.00