Seaga INF4C - Options Menu Overview; Forced Vend Feature

31Revision 2.EL950 1.3.1074C 18.6
OPTIONS

• Forced Vend • Opcal Vend
• Bill Escrow • POS Message
• Mul Vend • Set Point
• Free Vend • Drop Sensor
• Fast Change
FORCED VEND
Forces the customer to complete a purchase once they have made payment in any form. NOTE: If a
customer chooses a Forced Vend selecon and the motor fails, the customer will be allowed to escrow the
credit.
BILL ESCROW
Allows the last bill accepted to be returned, provided the bill acceptor is capable of such a feature.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 1 for Forced Vend Menu Forced Vend (Current Seng) *-Exit 1-Edit
4. Press 1 to toggle between ON and
OFF
Forced Vend (Choice Flashing) *-Exit #-Save
5. Press # to save the seng Forced Vend (New Seng) *-Exit 1-Edit
6. Press * two mes to exit 0.00
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 5 for Opons Menu Opons
3. Press 2 for Bill Escrow Menu Bill Escrow (Current Seng) *-Exit 2-Edit
4. Press 2 to toggle between ON and OFF Bill Escrow (Choice Flashing) *-Exit #-Save
5. Press # to save the seng Bill Escrow (New Seng) *-Exit 2-Edit
6. Press * three mes to exit 0.00