Seaga INF4C - Temperature Settings

30Revision 2.EL950 1.3.1074C 18.6
TEMP
SEL STYLE
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 4 for Conguraon Conguraon
3. Press 0 for Advanced Cong Password: Use keypad to enter password
4. Press 4 for Temp menu Temp (Current Seng) *-Exit, no change 4-Edit
5. Press 4 to toggle Snack, Cold, Cold Food,
Slackened, Eng Test, Dual Zone, Dual Upper
-6, Chilled, MZF, MZF -2, MZF -5, SZ Frozen, SZ
Frozen -2, SZ Frozen -5, SZ Cold, SZ Cold -1
Temp (Choice Flashing) *-Exit, no change # to Save
6. Press # to save the seng Temp (New Seng) *-Exit, no change 4-Edit
7. Press * three mes to exit 0.00
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 4 for Conguraon Conguraon
3. Press 0 for Advanced Cong Password: Use keypad to enter password
4. Press 5 for Sel Style Sel Style (Current Seng) *-Exit, no change 5-Edit
5. Press 5 to toggle 3 digit, 2 Dgt
40+, 2-Dgt ever, */# USD
Sel Style (Choice Flashing) *-Exit, no change # to Save
6. Press # to save the seng Sel Style (New Seng) *-Exit, no change 5-Edit
7. Press * three mes to exit 0.00