Seaga INF4C - Machine Shutdown Scheduling

42Revision 2.EL950 1.3.1074C 18.6
SHUTDOWN
This menu sets the VMC to shut down All Items, by Row or by Selecon, based on four (4) me of day
intervals. If the me falls within one of these intervals and the enre machine has been selected for
shutdown, then the message, “Vending Operaon to resume at hh.mm,” will be displayed. If a row or
individual selecon has been set for Shutdown, the same message displays once every me the customer
makes that selecon or selecons (row).
NOTE: The correct me and date must be set so that the shutdown intervals work correctly. See Time
and Date secon of this manual. Also, for any given day these four me intervals may overlap each other.
For each interval, the VMC can be programmed from no days up to every day of the week on which the
specied shutdown me intervals are acve.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 5 for Shutdown Shutdown
5. Press 1 for Interval1 (2 for Interval2, and so on) Interval1
6. Press 1 to for All Items All Items (Current Seng) *-Exit 1-Edit
7. Press 1 to toggle ON/OFF All Items (Choice Flashing) * Exit #-Save
8. Press # to save the seng All Items (New Seng) *-Exit 1-Edit
9. Press * to return to Interval1 Interval1
10. Press 4 for Day menu Day
11. Press 1 for All Days All Days (Current Seng *-Exit 1-Edit
12. Press 1 to toggle All Days ON/OFF All Days (New Seng) *-Exit #-Save
13. Press # to save the seng All Days (New Seng) *-Exit 1-Edit
14. Press 2 to toggle Monday ON/OFF Mon (Choice Flashing) *-Exit 2-Edit
15. Press # to save the seng Mon (New Seng) *-Exit 2-Edit
Use numbers 3-8 to complete the other days of the week using steps 13 and 14.
16. Press * two mes to return to Interval1 menu Interval1
17. Press 5 two mes for Start Time menu (Current Time) *-Exit 5-Edit
18. Enter Start Time in 24-hr me (HH:MM) New Time *-Exit #-Save
19. Press # to save the me New Time *-Exit 5-Edit
20. Press * once to return to Interval1 menu Shutdown
21. Press 6 two mes for Stop Time menu Stop Time
22. Press 6, then enter Stop Time in 24-hr me (HH:MM) New Time *-Exit #-Save
23. Press # to save the me New Time *-Exit 6 -Edit
24. Press * two mes to return to Shutdown Shutdown
25. Press 2, 3 or 4 to edit Intervals 2, 3 or 4 IntervalX
26. Press 9 for enable menu Enable (Current Seng) *-Exit 9-Edit
27. Press # to save the seng Lighng (New Seng) *-Exit 8-Edit
28. Press * ve mes to exit to Sales Mode 0.00