Seaga INF4C - Maximum Change Limit

41Revision 2.EL950 1.3.1074C 18.6
MAX CHANGE
This opon prevents change from being returned to the customer unl the amount of credit has been
reduced to a value less than or equal to the programmed maximum change limit.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 6 for Password (Advanced Features) Menu Password
3. Enter Password (default 2314) Advanced Features
4. Press 4 for Max Change menu Max Change
5. Press 1 for current Max Change seng Max Change (Current Seng) *-Exit 1-Edit
6. Press 1 to toggle ON/OFF Max Change (Choice Flashing) *-Exit #-Save
7. Press # to save the seng Max Change (New Seng) *-Exit 1-Edit
8. Press 2 and enter dollar amount Max Change: $--.— *-Exit #-Save
9. Press # to save the seng Max Change (New Seng) *-Exit 2-Edit
7. Press * three mes to exit 0.00