Seaga INF4C - General Safety Cautions

6Revision 2.EL950 1.3.1074C 18.6
CAUTION: Certain procedures described in this manual require a qualied,
trained technician to perform the parcular task at hand. These procedures
will be marked with the aenon symbol shown here:
Your Innity vending machine arrives with a special protected skid that prevents damage to the door due
to improper liing. When installing the machine on location, the Door Protectors and Skid Feet must be
removed. A Phillips head screwdriver is required.
Fig. 2 – Door Protectors and Skid Feet
Skid Feet
(Le and Right)
Skid Feet
(Le and Right)