Seaga Quick Break Combo QB218 - Selection Pricing; Coupon Setup

30QB218 6.1.2019 vers 1.0
SELECTION
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 1 for Price Program Price Program
3. Press 3 for Selecon
Selecon: -- $--.--
*-Exit, no change
4.
Use number keys on the keypad to set new
price, including cents.
Selecon: (New Selecon and Price)
*-Exit, no change
5. Press * two mes to exit to Sales Mode Price Program
COUPON
IMPORTANT: This opon requires a programmed validator. Up to ve dierent coupon values can be
set. In sales mode, once a coupon is accepted, no further coupons will be accepted unl a successful vend has
been made. If no value is set, coupons will be shown as free vends. If using both coupons and tokens, there are
only ve selecon combinaons available. For example, if Coupon1 is set for “All” items, Token1 is also set for
“All” items.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 1 for Price Program Price Program
3. Press 4 for Coupons
Coupons
*-Exit, no change
4.
Press 1 for Coupon1 (or corresponding num-
ber for addional coupons, up to Coupon5)
Coupon1
*-Exit, no change
5. Press 1 for All Items
All Items (Current Seng)
*-Exit, no change 1-Edit
6. Press 1 to toggle On/O
All Items (Choice Flashing)
*-Exit, no change #-Save
7. Press # to Save the new seng
All Items (New Seng)
*-Exit, no change #-Save
8. Press * to return to Coupon1 Coupon1
9. Press 4 to enter Coupon Value menu
Coupon1: $0.00
*-Exit, no change #-Edit
10. Press # to edit Coupon1 value
Coupon1: $0.00
*-Exit/Del #-Save