Seaga Quick Break Combo QB218 - Token Setup

33QB218 6.1.2019 vers 1.0
TOKEN
IMPORTANT: This opon requires a programmed changer and allows you to set the value of tokens
accepted. Note: If Space to Sales Whole Machine is On and you are seng Tokens by Row, the Row must be set
to Row 1. If using both coupons and tokens, there are only ve selecon combinaons available. For example,
if Coupon1 is set for “All” items, Token1 is also set for “All” items.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 1 for Price Program Price Program
3. Press 5 for Tokens
Tokens
*-Exit, no change
4.
Press 1 for Token1 (or corresponding number
for addional tokens, up to Token5)
Token1
*-Exit, no change #-Save
5. Press 1 for All Items
All Items (Current Seng)
*-Exit, no change 1-Edit
6. Press 1 to toggle On/O
All Items (Choice Flashing)
*-Exit, no change #-Save
7. Press # to Save the new seng
All Items (New Seng)
*-Exit, no change #-Save
8. Press * to return to Token1 Token1
9. Press 4 to enter Token Value menu
Token1: $0.00
*-Exit, no change #-Edit
10. Press # to edit Token1 value
Token1: $0.00
*-Exit, no change #-Save
11. Enter Token1 value
Token1: $0.00
*-Exit, no change #-Save
12. Press # to Save the Token1 Value seng
Token1: $(New Value)
*-Exit, no change #-Save
13.
Press * two mes to connue to Token2 – 5
or press * four mes to exit.
Price Program
TOKEN BY ROW
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2. Press 1 for Price Program Price Program
3. Press 5 for Tokens
Tokens
*-Exit, no change
4.
Press 1 for Token1 (or corresponding number
for addional tokens, up to Token5)
Token1
*-Exit, no change #-Save