Seaga Quick Break Combo QB218 - Exact Change

53QB218 6.1.2019 vers 1.0
24. Press * two mes to return to Discount menu Discount
25. Press 7 for Discount Value menu
Discount (Current Value)
*-Exit 7-Edit
26.
Press 7, then enter new Discount Value (Enter
the new price at which to sell the item)
Discount (New Value)
*-Exit #-Save
27. Press # to save the discount value
Discount (New Seng)
*-Exit #-Save
28. Press * two mes to return to Discount menu Discount
29. Press 9 for Enable Discount menu
Enable (Choice Flashing)
*-Exit 9-Edit
30. Press 9 to toggle Enable ON/OFF
Enable (Choice Flashing)
*-Exit #-Save
31. Press # to save the seng
Enable (New Seng)
*-Exit 9-Edit
32. Press * ve mes to exit to Sales Mode 0.00
EXACT CHANGE
Sets the coin tube value that will trigger the display to show Please Use Exact Change message. For
example, if Exact Change is set to $5.00, the message will display when the total of coins in the tube, as
counted by the VMC, is at or below $5.00 total.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2.
Press 6 for Password (Advanced Features)
Menu
Password
3. Enter Password (default 2314) Advanced Features
4. Press 2 for Exact Change
Exact Change $--.00
*-Exit 1-Edit
5. Press 1 to edit Exact Change
Exact Change (Flashing)
*-Exit 1-Edit
6. Use number keys to enter an amount
Exact Change (New Seng)
*-Exit 1-Edit
7. Press # to save the seng
Exact Change (New Seng)
*-Exit #-Save
8. Press * two mes to exit 0.00
ALTERNATE RULE – This funcon prevents a vend from occurring, ashes the Please Use Exact Change
message and will return the established credit amount if one or more of the coin tubes are too low to
give back the correct change for the vend. Note: This seng must be OFF if using a bill validator
only. If using a bill validator only, prices must be divisible by the denominaons accepted
by the bill validator.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **