Seaga Quick Break Combo QB218 - Shutdown; Shutdown by All Items

55QB218 6.1.2019 vers 1.0
5. Press 1 for current Max Change seng
Max Change (Current Seng)
*-Exit 1-Edit
6. Press 1 to toggle ON/OFF
Max Change (Choice Flashing)
*-Exit #-Save
7. Press # to save the seng
Max Change (New Seng)
*-Exit 1-Edit
8. Press 2 and enter dollar amount
Max Change: $--.—
*-Exit #-Save
9. Press # to save the seng
Max Change (New Seng)
*-Exit 2-Edit
7. Press * three mes to exit 0.00
SHUTDOWN
This menu sets the VMC to shut down All Items, by Row or by Selecon, based on four (4) me of day
intervals. If the me falls within one of these intervals and the enre machine has been selected
for shutdown, then the message, “Vending Operaon to Resume at hh.mm,” will be displayed.
If a row or individual selecon has been set for Shutdown, the same message displays once every me
the customer makes that selecon or selecons (row).
NOTE: the correct me and date must be set so that the shutdown intervals work correctly. See Time
and Date secon of this manual. Also, for any given day these four me intervals may overlap
each other. For each interval, the VMC can be programmed from no days up to every day
of the week on which the specied shutdown me intervals are acve.
STEP DISPLAY
1. Press Service Mode Buon Motor Count or Error Code **
2.
Press 6 for Password (Advanced Features)
Menu
Password
3. Enter Password (default 2314) Advanced Features
4. Press 5 for Shutdown Shutdown
5.
Press 1 for Interval1 (2 for Interval2, and so
on)
Interval1
6. Press 1 to for All Items
All Items (Current Seng)
*-Exit 1-Edit
7. Press 1 to toggle ON/OFF
All Items (Choice Flashing)
*-Exit #-Save
8. Press # to save the seng
All Items (New Seng)
*-Exit 1-Edit
9. Press * to return to Interval1 Interval1
10. Press 4 for Day menu Day
11. Press 1 for All Days
All Days (Current Seng
*-Exit 1-Edit
12. Press 1 to toggle All Days ON/OFF
All Days (New Seng)
*-Exit #-Save