To Next PageTo Next Page
Need help?Do you have a question about the Seagate Exos 7E10 and is the answer not in the manual?
Details the formatted capacity of the drives, measured in bytes per sector and total sectors.
Details the DC power requirements for various drive operations and models.
Explains the PowerChoice feature for tailored system power management and supported conditions.
Specifies the operating and non-operating temperature, humidity, and altitude limits.
Details the operating and non-operating temperature ranges and gradient limits for the drive.
Specifies the operating and non-operating relative humidity limits and gradient.
Details annualized failure rate, MTBF, and other reliability metrics for the drive.
Explains the warranty terms, conditions, and how to determine remaining warranty.
Explains how the drives use AES-256 bit encryption keys for data protection.
Describes the Admin SP and Locking SP security providers and access control mechanisms.
Explains how to set data access controls, including lock-on-reset and read/write lock settings.
Explains the cryptographic erase feature that changes encryption keys for data destruction.
Details S.M.A.R.T. commands for drive failure prediction and monitoring.
General| Form Factor | 3.5 inch |
|---|---|
| Interface | SATA 6Gb/s |
| RPM | 7200 RPM |
| Cache | 256 MB |
| Average Latency | 4.16 ms |
| MTBF | 2.5 million hours |
| Workload Rate Limit | 550 TB/year |
| Non-Recoverable Read Errors per Bits Read | 1 per 10^15 |
| Warranty | 5 years |
| Capacity | 1 TB, 2 TB, 3 TB, 4 TB, 6 TB, 8 TB, 10 TB |
| Power Consumption (Idle) | 5.5W |
