Seagate ST1000VM002 - Page 30

Seagate Video 3.5 HDD Product Manual, Rev. A 29
www.seagate.com
90 Enhanced security erase time 00A9
H
92 Master password revision code FFFE
H
93 Hardware reset value xxxx
H
95 Stream Min. Request Size 0000
H
96 Streaming Transfer Time - DMA 0000
H
97 Streaming Access Latency- DMA and PIO 0000
H
98–99 Streaming Performance Granularity 2710
H
/ 0000
H
100–103 Total number of user-addressable LBA sectors available (see
Section 2.2 for related information). These words are required for
drives that support the 48-bit addressing feature. Maximum value:
0000FFFFFFFFFFFFh.
ST1000VM002 = 1,953,525,168
104 Streaming Transfer Time - PIO 0000
H
105–107 ATA-reserved 0000
H
108–111 The mandatory value of the world wide name (WWN) for the
drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indicat-
ing 64-bit WWN support.
Each drive will have a
unique value.
112–127 ATA-reserved 0000
H
128 Security status 0001
H
129–159 Seagate-reserved xxxx
H
160–254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Note
Automatic Acoustic Management (AAM) features are not supported.
Note
See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
Table 8 Bit Descriptions
Description (if bit is set to 1)
Bit Word 63
0 Multiword DMA mode 0 is supported.
1 Multiword DMA mode 1 is supported.
2 Multiword DMA mode 2 is supported.
8 Multiword DMA mode 0 is currently active.
9 Multiword DMA mode 1 is currently active.
10 Multiword DMA mode 2 is currently active.
Table 7 Identify Device commands (Continued)
Word Description Value