EasyManua.ls Logo

Seagull Models Arising Star - Nose Gear Installation; Installing the Stopper Assembly

Seagull Models Arising Star
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Arising Star. Instruction Manual.
Installing steering arm as follow.
Adjust the nose gear steering arm until the
arm is parallel with the fire wall.
FUEL TANK.
INSTALLING THE STOPPER ASSEMBLY.
TOOLS REQUIRED
NOSE GEAR INSTALLATION.
1) Using a modeling knife, carefully cut
off the rear portion of one of the two nylon tubes
leaving 1/2” protruding from the rear of the
stopper. This will be the fuel pick up tube.
2) Using a modeling knife, cut one length
of silicon fuel line (not included) to 2-1/4” long.
Connect one end of the line to the weighted
fuel pickup and the other end to the nylon
pickup tube.
3) Carefully bend the second nylon tube
up at a 45º angle. This tube is the vent tube.
Connector.
4) Carefully heat the vent tube using a
heat gun or lighter to permanently set the
angle of the tube.
Steering arm.
Steering arm.
Pushrod wire.
Fuel Pickup
Tube.
Fuel Fill Tube.
Vent tube.

Related product manuals