Seagull Models EXTRA EA 300L - HINGING THE RUDDER; COMPONENT INSTALLATION: HORNS AND LIGHTS; LEDLIGHT ASSEMBLY; INSTALL AILERONS CONTROL HORN

5
www.seagullmodels.com
HINGING THE RUDDER.
Glue the rudder hinges in place using the
same techniques used to hinge the ailerons.
Hinge.
LEDLIGHT
INSTALL THE AILERONS CONTROL
HORN.
Locate the hardware necessary to install the
control horns for the ailerons.
Aileron Control Horn
Assembling the ledlight as shown below
pictures.
C/A glue