EXTRA EA 300l - 1395mm. Instruction Manual.
8
7) Slide the fuel tank into the fuselage. Guide
the lines from the tank through the hole in the
firewall.
8) Use balsa plywood to help prevent
moveable from transferring to the fuel tank as
shown.
You should mark which tube is the vent
and which is the fuel pickup when you attach
fuel tubing to the tubes in the stopper. Once
the tank is installed inside the fuselage, it may
be difficult to determine which is which.
6) When satisfied with the alignment of
the stopper assembly tighten the 3 x 20mm
machine screw until the rubber stopper ex-
pands and seals the tank opening. Do not
overtighten the assembly as this could cause
the tank to split.
FUEL TANK INSTALLATION.
Fuel Tank
Rubber
C/A glue
A
Vent tube.
Fuel pick up
Fuel fill tube.
INSTALLING THE BATTERY.
Battery.
INSTALLING THE MAIN LANDING GEAR
TO FUSELAGE.
Battery
To Next Page
Loading...
