Seagull Models SPACE WALKER II - Installing the Main Landing Gear

www.seagullmodels.com
7
3) A drop of C/A glue on the wheel collar
screws will help keep them from coming lose
during operation.
Repeat the process for the other wheel.
1) The blind nuts for securing the landing
gear are already mounted inside the fuselage.
2) Using the hardware provided, mount
the main landing gear to the fuselage.
INSTALLING THE MAIN LANDING GEAR.
6x20mm.
Lite-plywood block.
LANDING GEAR FAIRING
Landing gear
fairing.
3 x 10mm.
3x10mm.
(4 pcs).