3
www.seagullmodels.com
ADDITIONAL ITEMS REQUIRED.
0.55 - 0.72 2-4--stroke.
Computer radio with 7 servos.
Glow plug to suit engine.
Propeller to suit engine.
Protective foam rubber for radio
system.
Silicone fuel line.
TOOLS & SUPPLIES NEEDED.
Thick cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder’s triangle.
Wire cutters.
Masking tape & T-pins.
Thread-lock.
Paper towels.
KIT CONTENTS.TS
1 Fuselage
2 Wing Set
3 Tail Set
4 Canopy
5 Cowling
6 Wing Tube
7 Pilot
8 Fiberglass Wheel Pants
9 Landing Gear
10 Tail Wheel
11 Hardware Set
HINGING THE FLAP.
M2x10mm.
Drill 1mm.
M2x10mm.