7
www.seagullmodels.com
Elevator control horn.
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install the
engine mount included with your model. .
2) Use four 4x30mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
4x30mm.
C/A glue.
Balsa.
Thread locker glue.
Balsa.
Epoxy.
Epoxy.
C/A glue.
To Next Page
Loading...
