14 User Manual 62Pro
3 SPECIFICATIONS
3.1 Identification
The machine identification label (example in The power supply must be able
to provide the rated power according to the electrical code requirements for
the area of installation. Consult your local electrician for the power supply
requirements.
Figure 5) is located at the bottom of the right-hand cabinet, on the rear side of the
machine.
This label indicates the model (version) and the rated power of the machine.
CAUTION: The power supply must be able to provide the rated power
according to the electrical code requirements for the area of installation.
Consult your local electrician for the power supply requirements.
Figure 5: Machine identification labels (example).
3.2 Machine dimensions
3.2.1 Uncrated Metric American
Width 222 cm 87.4 in.
Height 143 cm 56.3 in.
Depth (excl. in-feed table) 45 cm 17.7 in.
Depth (incl. Standard in-feed table) 62 cm 24.4 in.
Depth (incl. Easy-feed table) 87 cm 34.3 in.
Working height 90 cm 35.4 in.
To Next Page
Loading...
