SEAL 62Pro - Page 8

6 User Manual 62Pro
5 Operating 20
5.1 Process controls 20
5.1.1 Control panel 20
5.1.2 Heater control 22
5.1.3 Additional controls 23
5.2 Operating modes 26
5.2.1 Normal forward mode 26
5.2.2 Reverse mode 26
5.2.3 Slow mode 27
5.3 Placing film rolls 28
5.3.1 Auto-grip shafts 28
5.3.2 Use of films with release liner 28
5.3.3 Loading shaft with film rolls 29
5.3.4 Presetting the tension 30
5.3.5 Pressure setting 30
5.4 Webbing 31
5.4.1 Upper section only 31
5.4.2 Upper and lower section 32
5.4.3 Roll to roll 34
5.4.4 Pull rollers 35
5.5 Processes and settings 36
5.5.1 Mounting images or decals 36
5.5.2 Pre-coating panels 37
5.5.3 Single-sided lamination 38
5.5.4 Double-sided lamination 38
5.5.5 Encapsulation 39
5.5.6 Over-lamination 39
5.5.7 Decaling 39
6 Maintenance 40
6.1 Cleaning 40
6.1.1 Cleaning the silicone covered rollers. 40
6.2 Preventive maintenance 41
6.2.1 Auto-grip shafts 41
6.3 Trouble shooting 41
6.4 Technical assistance 43
7 Glossary 44