the cable on the shore and last, disconnect it on the boat.
Do not soak the catches of the cable in water.
Do not modify any terminals of the electrical cable.
Never modify an electrical installation.
Unplug the cable from the shore and the socket on the boat
before leaving the dock.
CONTROL PANEL 230V:
Figure 13
6.5. RUDDERS AND STEERING SYSTEM
The boat is fitted with two GRP rudder blades.
Rudders are operated via central tiller.
Any contact of the rudder with the ground can cause the
blade to break or split. It requires immediate checking and
consultation with a professional.
DO NOT let go the steering tiller when you navigate
backwards. Self-turning of the rudder can damage the
steering mechanism. Recommended speed is not to exceed
2 knots.
It is recommended to disassemble the steering mechanism
To Next Page
Loading...
