DO NOT use cleaning agents like acetone, gasoline etc.
8.6. INTERIOR
8.6.1. INTERIOR WOOD SURFACES
Clean the varnished wood surfaces with fresh water and a clean cloth. Do
not use organic solvents or expose surfaces to high temperatures to
prevent permanent damage to the varnish. As wood is a natural product
minor differences in colour can occur.
Worn wood parts can be painted with good quality
polyurethane varnish. The varnish used must be compatible
with the original one. Before applying the varnish, prepare
the surface in accordance with the manufacturer’s
recommendations.
8.6.2. CUSHIONS
Use a foam shampoo for upholstery. When you leave the boat for a longer
period, lift the cushions, allowing them to dry completely.
8.6.3. REFRIGERATOR (OPTIONAL)
Clean your refrigerator regularly. Remove all the food and clean the
interior surfaces with a sponge and an appropriate cleaning agent. To let
the interior dry completely leave the refrigerator cover open when you
leave the boat for longer period.
8.6.4. BILGE STRAINERS AND PUMPS
After cleaning the boat’s interior, proceed to inspect the bilge pump
strainer and bilge, removing the dirt and drying it to prevent odor and
mildew.
Dirt, hair etc. should not be directly washed into the bilge
during any cleaning process because they may plug the
bilge pump and prevent it from regular functioning.
8.6.5. FUEL AND WATER TANKS
To Next Page
Loading...
