Seastar Solutions Seastar Jackplate User Manual

16
SeaStar Hydraulic Jackplate
6. Does not run in one
direction.
• Faulty relay. • Check for correct function of relays on
harness. On activation of the switch in
either direction, there should be an audible
click in the relay and continuity across
relay lines when switching. Replace
faulty relay if necessary.
7. Height gauge operates
erratically (SmartStick
equipped models only)
• Low battery voltage. • Check battery voltage. A minimum
of 10.5V must be provided to the
SmartStick sensor for correct
operation. Charge battery if necessary.

Seastar Solutions Seastar Jackplate Specifications

General

Brand	Seastar Solutions
Model	Seastar Jackplate
Category	Boating Equipment
Language	English