4
SeaStar Hydraulic Jackplate
JP5060-000100
The safety information provided below is intended to inform you
of the warning information on your products. Contact SeaStar
Solutions if labels are missing.
The Jackplate is a hydraulic system and must not be relied on to
maintain position over a long term. Trailer locks and other safety
methods must be used.
1.9 Important Labels
WARNING
WARNING
Figure 3. Safety labels.
1.8 Trailering and Storage
1. The SeaStar Jackplate will maintain position during operation
and short term storage, however it should not be relied on to
provide long term support over extended storage or trailering
conditions.
2. During storage or trailering, the outboard motor must be
positioned in the lowest vertical position and/or at a trim
position angle which will not allow interference as defined in
Section 2.6.