51Cockpit
Instrument panel menus*
Example of menu use
Fig. 41 Windscreen wip-
er lever: control buttons.
Fig. 42 Controls on the
steering wheel: control
buttons.
The setting of a speed warning will be used as an example of how
to use the menus. This is a good idea if you are, for example, using
winter tyres which are not suited for the top speed of the vehicle.
1. Open the main menu with the MFI lever
– Switch the ignition on.
– Hold down button
B
for two seconds to return to main menu
from other menu. It may be necessary to repeat this operation
until the main menu is displayed.
2. Open the menu “Configuration” with the MFI lever
– To choose an option from the menu, press the upper or lower
end of the rocker switch. The selected option is displayed be-
tween two lines and there will also be a triangle on the right.
– Select menu Configuration.
– Press button
A
on the windscreen wiper lever. The Configura-
tion menu is opened.
2. Access the “Configuration” menu with the steering wheel
controls
– To access the “Configuration” menu, press button
C
⇒ Fig. 42
until the menu is displayed. Now you are in this menu.
3. Open the main menu “Winter tyres”
– Select option Winter tyres using switch
B
.
– Press the button
A
. The menu Winter tyres is opened.
4. Program a speed limit warning
– Use button
B
to select the option +10 km/h or -10 km/h and
press button
B
to either increase or decrease the speed dis-
played.
5. To activate and deactivate the speed limit warning
– Use switch
B
to select the menu point On / Off and press the
button to switch the speed warning on or off. If the speed warn-
ing is deactivated, three dashes will be displayed ---.
Safety Operation Advice Technical specifications
To Next Page
Loading...
