Emergencies
Changing number plate light bulbs
Fig. 112 In the rear bumper: number plate
light
.
Fig. 113 Number plate light: Remove the bulb
ho
l
der.
Follow the steps indicated:
Pr
e
ss the number plate light in the direc-
tion of the arrow ››› Fig. 112.
Remove the number plate bulb slightly.
1.
2.
In the connector lock, turn ››› Fig. 113 to-
wards the arrow
1
and pull the connec-
t
or
.
Rotate the bulb holder in the direction of
arrow
2
and extract it with the bulb.
R
ep
lace the defective bulb with a new
bulb with the same features.
Insert the bulb holder in the number
plate light and turn in the opposite di-
rection of arrow
2
until it stops.
Plug the c
onnect
or into the bulb holder.
Note
Depending on how equipped the vehicle is,
the number pl
ate lights may be LEDs. LEDs
have an estimated life that exceeds than that
of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
3.
4.
5.
6.
7.
98
To Next Page
Loading...
