Unlocking and locking 115
Safety First Operating Instructions Practical Tips Technical Specifications
– Carefully insert the flat end of a screwdriver (from the vehicle's
tool kit) at the rear of the glass cover on the interior light
⇒ page 114, fig. 83.
– Carefully lever off the glass cover.
– Take the crank handle from its mounting on the inside of the fuse
box cover ⇒ page 265.
– Insert the crank handle all the way into the hexagonal socket
⇒ page 114, fig. 84.
– Hold the crank handle in position and turn it to close the sunroof.
– Reinstall the glass cover: insert the plastic lugs first and then
press the cover upwards.
– Have the fault repaired.
Note
You can use the screwdriver handle to make it easier to turn the crank. Detach
the handle from the screwdriver and then fit the handle onto the crank.
1
2
ExeoST_EN.book Seite 115 Freitag, 3. September 2010 11:41 11
To Next Page
