Technical Specifications 301
Safety First Operating Instructions Practical Tips Technical Specifications
Technical Specifications
Checking fluid levels
From time to time, the levels of the different fluids in the
vehicle must be checked. Never fill with incorrect fluids,
otherwise serious damage to the engine may be caused.
Fig. 248 Diagram for the location of the various elements
Vehicle battery
Engine oil filler cap
Brake fluid reservoir
Engine oil dipstick
Coolant expansion tank
Windscreen washer fluid container
Hydraulic fluid reservoir for power steering
The checking and refilling of service fluids are carried out on the components
mentioned above. These operations are described in the ⇒ page 229.
Overview
You will find further explanations, instructions and restrictions on the tech-
nical specifications as of ⇒ page 297.
Note
The layout of parts may vary depending on the engine.
A
1
A
2
A
3
A
4
A
5
A
6
A
7
ExeoST_EN.book Seite 301 Freitag, 3. September 2010 11:41 11
To Next Page
Loading...
