Airbag system 43
Safety First Operating Instructions Practical Tips Technical Specifications
should only be performed by a qualified workshop. Otherwise, faults may
occur during the airbag system operation.
• Do not attempt to modify components of the airbag system in any way.
• The side and head airbags are managed through sensors located in the
interior of the front doors. To ensure the correct functioning of the side and
head airbags neither the doors nor the door panels should be modified in
any way (e.g. fitting loudspeakers). If the front door is damaged, the airbag
system may not work correctly. All work carried out on the front door must
be made in a qualified workshop.
WARNING (continued)
ExeoST_EN.book Seite 43 Freitag, 3. September 2010 11:41 11
To Next Page
Loading...
