Chapter 6
17
6 POWER SUPPLY
Analog version:
12VDC (with DC/DC converter Type 12V/24V) or
24VDC (with DC/DC converter Type 24V/24V)
12VDC (without DC/DC converter) => depending on cable length and cross section
Digital version:
9.6…30VDC
7 MAINTENANCE
From time to time the measuring site has to be controlled, if the sensor is dirty due to weather
conditions, insects or other circumstances.
Warning
Do not connect the device directly to 110 VAC or 230 VAC!
Important notice
Should there be any damages in spite of proper use, the device has to be sent back to
SEBA for repair. All modifications on electronic components or cables that are beyond
the herein described procedures, must only be conducted by SEBA.
Neglecting this regulation leads to termination of all warranty claims!
To Next Page
Loading...