222 •
1. Tilt the device so that the power supply connection socket is accessible.
ATTENTION!
Damage to device as a result of excessive voltage
Commercially-available power supply units may deliver a higher
voltage than they quote. The scale may overheat, catch fire, melt or
short-circuit.
► Use only original seca plug-in power supply units with controlled
12 V output voltage.
2. Insert the device connector of the power supply unit into the power
supply connecting socket of the scale.
3. Carefully return the device to an upright position.
4. Plug the power supply unit into a power supply socket.
To Next Page
Loading...
