Operation • 231
Activating/deactivating
announcement of measured results
(reSUL)
You can set the device so that the measured results (weight, height and BMI)
are announced after every measuring operation.
NOTE:
If voice output is in English, the unit of measurement announced will
correspond to the setting for the multifunctional display (see "Switch-
ing unit of weight (Unit)" on page 237) and to the unit of height (see
"Switching unit of height (HUnit)" on page 237).
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "reSUL".
4. Select the desired setting:
–On
–Off
5. Confirm your selection.
You exit the menu automatically.
Activating/deactivating the
announcement “Take your printed
ticket” (Print)
If you have connected a seca wireless printer to the device, you can set the
device so that following the measurement, there is an announcement telling
you to take the printed ticket with the results.
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "Print".
4. Select the desired setting:
–On
–Off
5. Confirm your selection.
You exit the menu automatically.
Activating/deactivating
announcement of patient
instructions (InStr)
You can set the device so that patient instructions are announced for every
measuring operation.
NOTE:
Select a language the patient understands (see "Selecting language
(LAng)" on page 230).
1. Select the item "VOICE" from the menu.
2. Confirm your selection.
3. Use the arrow key (send/print) to select the menu item "InStr".
4. Select the desired setting:
–On
–Off
5. Confirm your selection.
You exit the menu automatically.
Configuring beeps ► Configure the beeps as described in the section entitled "Activating/
deactivating beeps (bEEP)" on page 236.
To Next Page
Loading...
