Seca 703 - Activate Autohold Function; (Ahold)

Operation • 51
English
2. Confirm your selection.
Arrows can be seen flashing in the display.
The additional weight last stored is displayed.
3. You can accept the stored value or adjust it using
the arrow keys.
NOTE:
If you enter the value "0", the function will be
switched off. The message "Pt" will no longer
be displayed.
4. Confirm your selection.
5. Ask the patient to step onto the scales.
The patient's weight is displayed.
The additional weight stored has been automati-
cally deducted.
6. To disable this function, select the item "Pt" in the
menu again.
7. Confirm your selection.
The function is disabled.
You will leave the menu automatically.
Activate Autohold
function (Ahold)
If you activate the Autohold function, the measured
result for each weighing operation will continue to be
displayed after the load has been removed. This means
you no longer have to manually activate the Hold func-
tion for every weighing operation.
NOTE:
• With certain models this function is already
activated at the factory. If required, you can
disable this function.
• Whatever selection is made here, in the 2 in 1
function the child's weight is always deter-
mined with Autohold.
1. Select the item "Ahold" in the menu.
2. Confirm the selection.
The current selection is displayed.
3. Select the setting you require:
–On
–Off
4. Confirm your selection.
You will leave the menu automatically.