To Next PageTo Next Page
Need help?Do you have a question about the Seca 7031321007 and is the answer not in the manual?
General| Capacity | 200 kg |
|---|---|
| Graduation | 100 g |
| Interface | RS232 |
| Power Supply | Mains operation, battery operation |
| Weight | 1.5 kg |
| Maximum Capacity | 200 kg |
| Display | LCD |
| Automatic Switch-off | Yes |
| Functions | BMI calculation, Tare function |
Overview of the service instructions and document structure.
Information on how to identify the device model and serial number.
Details on the main components of the scale and their functionality.
Describes the measuring method of the head slider and graduation marks.
Overview of all maintenance jobs that can be carried out.
Detailed steps and requirements for adjusting scales.
Instructions for readjusting head slider electronics after replacement.
How to view the gravity factor setting on the scale.
Procedure for setting the gravity factor on non-approved models.
Lists error descriptions, possible causes, and remedies for scale issues.
Identifies error symptoms, causes, and remedies for the head slider.
Details radio-specific error symptoms, causes, and remedies.
Lists specific error codes (Er:x:nr) for scale faults.
Lists specific error codes (Er:x:nr) for head slider faults.
Lists specific error codes (Er:x:nr) for radio module faults.
Overview of measurements to identify specific errors.
How to measure supply voltage at the electronics board.
Methods for identifying load cell defects using diagnosis or multimeter.
Purpose of the software for wireless communication and updates.
Steps for installing and starting the seca wireless updater program.
Procedures for updating radio module software for customers.
Process for setting up wireless groups and teaching-in devices.
Requirements for a stable wireless connection during data updates.
Instructions for updating wireless printer software using an SD card.
Information on updating older generation printers and their limitations.
Remedies and steps to take if wireless updates fail.
Critical safety precautions before performing any work.
Guidelines for preventing electrostatic discharge damage to components.
Instructions for removing and fitting parts related to the baseframe.
Step-by-step guide for replacing the load cell.
Procedure for setting the overload protection devices on the platform.
Procedures for working with the display unit.
Steps to remove and replace the membrane keypad.
Guide for replacing the battery compartment, NEC2 display, and radio module.
List of frame components and their part numbers.
List of display components and their part numbers.
List of frame components and their part numbers.
List of display components and their part numbers.
List of frame components and their part numbers.
List of display components and their part numbers.
