Seca 7031321007 - Scale Adjustment Procedures

Maintenance seca
05.10.12/RLEU/ARI/MRE 9/38 30-34-00-812b
Device check digit
The overall check digit for the device is the total of the individual check digits.
Representation on display
Hardware module
Firmware version with index / internal seca value
PTB version number
PTB check digit
2.1 Adjustment of Scales
[374|376|378|703|704|284|285|954|957|959|963]
2.1.1 General [374|376|378|703|704|284|285|954|957|959|963]
To compensate for linear measuring deviations, which occur e.g. as a result of
gravity variations in different gravity zones, the scale offers an adjustment
feature. This adjustment must also be carried out whenever the load cell is
replaced.
seca scales with modular NEC-G2 electronics are fitted with a software-
controlled adjustment device that is controlled using the existing operating
elements. When developing the adjustment device, special attention was paid
to the following requirements:
Weight module
290.08
01.08
1A47
Display
290.08
01.08
1A47
Compact
290.08
01.08
1A47
Weight module
290.08
01.08
1A47
Extended display
298.08
01.08
4266
M704
290.08 / 290.08
02.16
348E
M285
290.08 / 298.08
02.16
5CAD
M703
290.08
01.08
1A47