56 •
NOTE:
The wireless module is switched off when
restoring the factory settings. Data for existing
wireless groups remains in the memory. These
groups do not need to be set up again.
1. Select the item "Reset" in the menu.
2. Confirm the selection.
You will leave the menu automatically.
3. Switch the scales off.
The factory settings are restored and will be availa-
ble when the scales are next switched on.
7. SECA 360° WIRELESS NETWORK
7.1 Introduction
This device is equipped with a wireless module. The
wireless module allows measured results to be trans-
mitted wirelessly for analysis and documentation. Data
can be transmitted to the following equipment devices:
• seca wireless printer
• PC with seca USB wireless module
Autoclear (Aclear)
depending on
model
Pre-Tare (Pt) 0 kg
Height for body mass index
(BMI)
170 cm
Wireless module (SYS) off
Autosend (ASend) off
Autoprint (APrt) off
Function Factory setting
To Next Page
Loading...
