Model 763 19
Power supply
The power supply must come from the
supplied AC adaptor.
The connector for the AC adaptor is lo-
cated under the rod.
Please only use the power supply unit
supplied with the product or power sup-
ply units from the seca accessories
range. Before plugging into the socket,
check whether the mains voltage details
on the power supply unit match those of
the local voltage supply.
4. Setting up and aligning the scales
– Place the scales on a level surface.
– Align the scales by removing the foot
screws. The scales must stand se-
curely on the floor on all four feet.
To Next Page
Loading...
