Seca 763 - Correct Weighing; Switching the Weight Display; Switching off the Device

Model 763 21
Correct weighing
– Remove load from scales.
– Press the Start button.
, and appear in the
display in sequence. After this the
scales are automatically set to zero
and ready for operation.
– If necessary, change over the weight
display (see "Switching the weight dis-
play")
– Stand on the scales and remain mo-
tionless.
– Read the weighing result off the digital
display.
– If a weight of more than 250 kg or
550 lbs is placed on the scales, then
appears in the display.
– To switch off the scales, press the
Start button again.
Switching the weight display
The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
START key. Weight is initially dis-
played in the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the
kg/lbs/sts key.
–The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
–The lbs or sts display lights up.
Switching off the device
– To switch off the scales, press the Start button again.