Secure Power Ltd
User Manual
18
Load: Display the numerical value of the active power (WATT) and apparent power(VA) of the load.
For example, as the following graphics shows: the WATT of the load is 100w, VA is 100VA (when
disconnect load, it is a normal phenomenon to show a small numerical value of WATT and VA).
Temperature: Display the temperature of the inverter in the UPS. As the following graphics shows: the
temperature of the inverter is 37.
Input: Display the voltage and frequency of the input. As the following graphics shows: the input
voltage is 210v, input frequency is 49.8Hz.
To Next Page
Loading...
