Secure Power Ltd
User Manual
22
key to make the buzzer stop beeping temporarily to wait for maintenance. You can also press the
OFF key to shut down the UPS when confirm that there is no serious fault.
NOTE: As for corresponding information of the fault code, please refer to Fault Code information
Table in Appendix.
Notice：
► the following process must be performed if UPS is connected with generator:
► First turn on generator, after it runs stably connect output power of generator to UPS input terminal
and then turn on UPS. After UPS turned on, please connect load one-by-one.
► It is recommended that the generator capacity is twice the UPS rated capacity
► Do not use the ECO mode when the quality of the input AC mains is not good.
To Next Page
Loading...
