EasyManua.ls Logo

Seeley Braemar LSHV Series - User Manual

Seeley Braemar LSHV Series
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
HIGH WALL INVERTER
(English) (LSHV SERIES)
MODE
FAN
WiFi TEMP
QUIET
LIGHT
CLOCK
TIMER ON TIMER OFF
I FEELSLEEP
TURBO

Table of Contents

Questions and Answers

  • C
    Crystal BaileyAug 3, 2025
    What to do if my Seeley Braemar LSHV Inverter air conditioner does not run?
    • J
      Jennifer GonzalesAug 3, 2025
      If your Seeley Inverter air conditioner isn't running, there could be several reasons. First, there might be a power failure, in which case you should wait for the power to resume. Second, a fuse might have blown, or a circuit breaker might be open; replace the fuse or reset the breaker. Finally, the thermostat adjustment might be too low in heating mode or too high in cooling mode. Check the thermostat setting, especially if you're using ‘I FEEL’ mode, and ensure the remote is in an appropriately cool or hot location.
  • T
    Tracy WillisAug 8, 2025
    Why is my Seeley Inverter remote controller not operating the air conditioner?
    • A
      Ashley TorresAug 8, 2025
      If your Seeley Inverter's remote controller isn't working, it might be out of range; the signal range is 8 meters. Poor signal reception could also be the issue; try removing any obstacles or sources of electrical interference. Lastly, check the batteries in the remote controller and replace them if needed, especially if there's no display.
  • D
    Derek WilliamsAug 13, 2025
    What to do if my Seeley Braemar LSHV Inverter has insufficient cooling?
    • S
      shane78Aug 13, 2025
      If your Seeley Inverter isn't cooling enough, it could be because the room was very hot when you started the system; give the unit time to cool the room. Another reason may be that the air filter is dirty or blocked; clean the filter to resolve this.
  • A
    Alex MorrisAug 18, 2025
    Why can't I adjust the SET temperature on my Seeley Inverter?
    • M
      Marvin FrazierAug 18, 2025
      If you can't adjust the SET temperature on your Seeley Inverter, it might be because the unit is operating in AUTO mode, where temperature settings are disabled. Alternatively, the temperature you're trying to set might be outside the allowable range, which is 16-30°C.
  • A
    Amanda DavisAug 23, 2025
    Why does my Seeley Inverter air conditioner make a clicking sound?
    • A
      Alex HernandezAug 23, 2025
      If you hear a clicking sound from your Seeley Inverter air conditioner, especially during heating or cooling operation, it's likely due to plastic parts expanding or shrinking because of sudden temperature changes. This is normal.
  • D
    Debra IngramAug 28, 2025
    Why is my Seeley Braemar LSHV Inverter cooler not operating at full power?
    • J
      james95Aug 28, 2025
      If your Seeley Inverter cooler isn't operating at full power, it's possible that DRED (Demand Response energy saving) mode has been activated by the Electricity Supplier. DRED will stop when grid power demands are reduced.

Summary

Main Components

Introduction and Safety

Operation

Remote Controller Overview

Covers remote controller usage, layout, and battery replacement procedures.

Operational Modes and Basic Controls

Explains controller layout, ON/OFF, and various operating modes like AUTO, COOL, DRY.

Fan Speed and Temperature Settings

Details fan speed adjustment, temperature setting, X-FAN, TURBO, and LIGHT features.

Comfort and Timing Functions

Covers QUIET mode, timer settings, and louvre swing adjustments.

Advanced Sleep and I FEEL Modes

Explains the I FEEL feature and different SLEEP mode functionalities.

System Lock and Connectivity

Details LOCK function, temp scale toggle, Energy Saving, 8°C Heat, and WiFi connectivity.

Emergency Operation and WiFi Setup

Guides on using emergency operation and installing the WiFi module.

Error Display and Fault Conditions

Error Code Meanings

Lists common error codes (E1, E5, E8, H6, d1-d3) and their potential causes/resets.

Fault Condition Handling

Advises on immediate actions for overheating, abnormal sound, tripping breakers, etc.

Maintenance and Service

Safety Precautions for Maintenance

Emphasizes isolating power before cleaning or maintenance.

Air Filter Cleaning Procedure

Step-by-step guide for removing, cleaning, and drying the air filter.

Indoor Coil and Outdoor Unit Checks

Recommendations for checking drain connections and outdoor unit clearances.

Refrigerant and Professional Service

Explains refrigerant issues and the importance of qualified technicians.

Maintenance Schedule

Home Owner;User Maintenance Tasks

Lists monthly and annual tasks like air filter cleaning and replacement.

Qualified Technician Maintenance Tasks

Outlines annual checks for drain, refrigerant, fans, connections, and overall installation.

Operation Tips

Troubleshooting

Unit Not Running or Remote Issues

Addresses problems like the unit not running or the remote controller not operating.

Cooling, Noise, and Temperature Issues

Covers insufficient cooling, clicking sounds, and SET temperature adjustment problems.

Power and DRED Mode Issues

Explains issues related to power, cooler output, and DRED mode activation.

Warranty and Service

Seeley Braemar LSHV Series Specifications

General IconGeneral
BrandSeeley
ModelBraemar LSHV Series
CategoryInverter
LanguageEnglish

Related product manuals