EasyManua.ls Logo

Seeley Braemar LSHV50D1S - User Manual

Seeley Braemar LSHV50D1S
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
HIGH WALL INVERTER
(English) (LSHV SERIES)
MODE
FAN
WiFi TEMP
QUIET
LIGHT
CLOCK
TIMER ON TIMER OFF
I FEELSLEEP
TURBO

Table of Contents

Questions and Answers

  • J
    Jennifer MartinAug 7, 2025
    What to do if my Seeley Inverter air conditioner does not run?
    • K
      Kimberly KingAug 8, 2025
      If your Seeley Inverter air conditioner isn't running, there could be several reasons. First, there might be a power failure, in which case you should wait for the power to resume. Second, a fuse might have blown, or a circuit breaker might be open; replace the fuse or reset the breaker. Finally, the thermostat adjustment might be too low in heating mode or too high in cooling mode. Check the thermostat setting, especially if you're using ‘I FEEL’ mode, and ensure the remote is in an appropriately cool or hot location.
  • A
    Aaron BartonAug 13, 2025
    Why is my Seeley Braemar LSHV50D1S Inverter remote controller not operating the air conditioner?
    • J
      Julie BarnesAug 13, 2025
      If your Seeley Inverter's remote controller isn't working, it might be out of range; the signal range is 8 meters. Poor signal reception could also be the issue; try removing any obstacles or sources of electrical interference. Lastly, check the batteries in the remote controller and replace them if needed, especially if there's no display.
  • T
    Toni SandersAug 18, 2025
    What to do if my Seeley Braemar LSHV50D1S Inverter has insufficient cooling?
    • G
      garciakirkAug 18, 2025
      If your Seeley Inverter isn't cooling enough, it could be because the room was very hot when you started the system; give the unit time to cool the room. Another reason may be that the air filter is dirty or blocked; clean the filter to resolve this.
  • P
    Patrick DavisAug 23, 2025
    Why can't I adjust the SET temperature on my Seeley Braemar LSHV50D1S Inverter?
    • E
      Elizabeth SotoAug 23, 2025
      If you can't adjust the SET temperature on your Seeley Inverter, it might be because the unit is operating in AUTO mode, where temperature settings are disabled. Alternatively, the temperature you're trying to set might be outside the allowable range, which is 16-30°C.
  • A
    alexandercarpenterAug 27, 2025
    Why does my Seeley Braemar LSHV50D1S Inverter air conditioner make a clicking sound?
    • M
      Margaret Smith MDAug 27, 2025
      If you hear a clicking sound from your Seeley Inverter air conditioner, especially during heating or cooling operation, it's likely due to plastic parts expanding or shrinking because of sudden temperature changes. This is normal.
  • E
    Eduardo HarrisSep 1, 2025
    Why is my Seeley Braemar LSHV50D1S cooler not operating at full power?
    • J
      John GrahamSep 1, 2025
      If your Seeley Inverter cooler isn't operating at full power, it's possible that DRED (Demand Response energy saving) mode has been activated by the Electricity Supplier. DRED will stop when grid power demands are reduced.

Summary

Main Components Overview

Introduction and Safety Precautions

Operation Guide

Remote Controller Guidelines

Important notes and precautions for using the remote control, including battery replacement.

Controller Layout and Basic Functions

Diagram of the remote and explanation of essential functions like ON/OFF, MODE, and FAN SPEED.

Temperature and Clock Adjustment

Instructions for setting the clock and adjusting the temperature using TEMP and arrow buttons.

Special Operation Features

Details on QUIET mode, TIMER settings (ON/OFF), and SWING functions for airflow direction.

Advanced Modes and Comfort Features

Explains the I FEEL feature for temperature sensing and various SLEEP mode configurations.

Unit Settings and Connectivity

Covers remote LOCK, temperature scales, ENERGY SAVING, 8°C HEATING, and WIFI functions.

Emergency Operation and WiFi Setup

Procedures for emergency unit operation and setting up the smart WiFi control.

Error Display and Fault Conditions

Information on interpreting error codes displayed on the unit and recognizing fault conditions.

Maintenance and Service

Air Filter Maintenance

Step-by-step guide for cleaning and maintaining the air filter for optimal performance.

Indoor Coil and Outdoor Unit Checks

Recommendations for checking indoor coil drains and outdoor unit clearances.

Refrigerant and Professional Service

Importance of refrigerant levels and recommending qualified technicians for service.

Maintenance Schedule

Operation Tips

Troubleshooting Guide

Warranty and Service Information

Seeley Braemar LSHV50D1S Specifications

General IconGeneral
BrandSeeley
ModelBraemar LSHV50D1S
CategoryInverter
LanguageEnglish

Related product manuals