What to do if my Seeley Braemar SDHVD1S air conditioner does not run?
If your Seeley Inverter air conditioner isn't running, first, check for a power outage and wait for the power to be restored. If the power is on, inspect the fuse and replace it if it's blown, or reset the circuit breaker if it's open. Lastly, make sure the thermostat is properly adjusted for heating or cooling mode.
Why does my Seeley Braemar SDHVD1S air conditioner make a clicking sound?
If you hear a clicking sound from your Seeley Inverter air conditioner, it's likely due to plastic parts expanding or shrinking because of sudden temperature changes during heating or cooling. This is a normal occurrence.
General| Category | Inverter |
|---|---|
| Frequency | 50 Hz |
| Protection | Overload, short circuit, over temperature, low battery alarm, low battery shutdown |
| Cooling | Fan cooled |
| Operating Temperature | 0-40°C |
Identifies and illustrates the main components of the indoor and outdoor units.
Outlines essential safety guidelines, important notices, and warranty compliance for the unit.
Explains the wired controller layout, LCD icons, and button functions for operation.
Covers setting mode, fan speed, and temperature for basic cooling and heating.
Details various advanced functions like swing, timer, sleep, and health modes.
Explains specialized functions like E-Heater, Blow, Filter, Quiet, and Ultra-Dry modes.
Addresses indoor fan shutdown, error display codes, and system management.
Details tasks like air filter cleaning, coil checks, and refrigerant care for optimal performance.
Provides a schedule for home owner and technician maintenance tasks for long-term care.
Explains common phenomena encountered during normal air conditioner operation.
Lists common problems, their probable causes, and suggested remedies for the unit.
To Next Page