What to do if my Seeley Braemar SDHV16D1S Inverter air conditioner does not run?
If your Seeley Inverter air conditioner isn't running, first, check for a power outage and wait for the power to be restored. If the power is on, inspect the fuse and replace it if it's blown, or reset the circuit breaker if it's open. Lastly, make sure the thermostat is properly adjusted for heating or cooling mode.
Why does my Seeley Inverter air conditioner make a clicking sound?
If you hear a clicking sound from your Seeley Inverter air conditioner, it's likely due to plastic parts expanding or shrinking because of sudden temperature changes during heating or cooling. This is a normal occurrence.
Overview of wired controller appearance and LCD icons.
Cautionary notes and general guidance for using the wired controller.
Detailed explanation of various icons displayed on the LCD screen.
Explanation of the functions of each button on the wired controller.
How to select different operating modes like Cool, Heat, Fan, Dry, Auto.
How to adjust the fan speed to different levels.
Instructions for adjusting the desired room temperature.
How to set timers for the unit to turn on or off automatically.
How error codes are displayed on the wired controller.
General| Model | SDHV16D1S |
|---|---|
| Type | Inverter |
| Brand | Seeley Braemar |
| Coefficient of Performance (COP) | 3.8 |
| Refrigerant | R32 |
| Operating Temperature (Heating) | -15°C to 24°C |
| Power Supply | 220-240V/50Hz |
| Energy Efficiency Ratio (EER) | 3.2 |
| Outdoor Unit Dimensions (HxWxD) | 550mm x 780mm x 285mm |
To Next Page