What to do if my Seeley Inverter air conditioner does not run?
If your Seeley Inverter air conditioner isn't running, first, check for a power outage and wait for the power to be restored. If the power is on, inspect the fuse and replace it if it's blown, or reset the circuit breaker if it's open. Lastly, make sure the thermostat is properly adjusted for heating or cooling mode.
Why does my Seeley Braemar SDHV10D1S Inverter air conditioner make a clicking sound?
If you hear a clicking sound from your Seeley Inverter air conditioner, it's likely due to plastic parts expanding or shrinking because of sudden temperature changes during heating or cooling. This is a normal occurrence.
Describes the appearance and icons of the wired controller.
Provides cautionary notes and guidelines for using the wired controller.
Details the purpose and operation of each button on the wired controller.
Explains how to turn the indoor unit on and off using the controller.
Guides users on switching between operation modes like Auto, Cool, Dry, Fan, and Heat.
Details how to adjust the fan speed through various levels available.
Explains how error codes are displayed and what they signify.
Outlines the recommended maintenance tasks and their frequency for the unit.
General| Model | SDHV10D1S |
|---|---|
| Brand | Seeley Braemar |
| Refrigerant | R32 |
| Type | Inverter |
| Power Supply | 220-240V, 50Hz |
To Next Page