28
TO SET - MAX DEPTH ALARM
(while in the Surface Mode)
Factory set for 330 feet, the Maximum Depth Alarm can be
set to values between 30 feet (3 meters) and 330 feet ( 99
meters) in increments of 10 foot (3 meters).
• Press Both buttons simultaneously, release when SET:
1 appears.
• Press and release the Advance (Front) button, FO2
appears with the value flashing.
• Press the Advance (Front) button 1 more time.
• The graphics MAX FEET and dEEP, and Alarm icon ap-
pear with the Max Depth value flashing (Fig. 22).
• Press and release the Select (Side) button until the
desired Alarm value appears.
• Press the Advance (Front) button to accept the setting
and advance to Elapsed Dive Time Alarm, or press and
hold Both buttons for 2 seconds to revert to Surface
Mode.
Fig. 22 - Set Depth Alarm
To Next Page
Loading...
