32
TO SET - HOUR FORMAT
(while in the Surface Mode)
Factory set for 12 Hr (12: Am to 11: Pm), the Format can
also be set for 24 Hr (0: to 24: hours).
• Press Both buttons simultaneously, release when SET:
2 appears.
• Press and release the Advance (Front) button, the Units
screen appears with the set point flashing.
• Press the Advance (Front) button 1 more time.
• The graphic Hour appears with 12 (or 24) flashing (Fig.
26).
• Press and release the Select (Side) button to toggle
between 12 and 24
• Press the Advance (Front) button to accept the setting
and advance to Set Time of Day, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 26 - Set Hour Format
To Next Page
Loading...
