33
TO SET - TIME OF DAY
(while in the Surface Mode)
Factory set for factory local time, the Time can be set to
values between 01:00 to 12:59 (Am/Pm) or 0:00 to 23:59
(24 Hr Format).
• Press Both buttons, release when SET: 2 appears.
• Press and release the Advance (Front) button, the Units
screen appears with the set point flashing.
• Press the Advance (Front) button 2 more times. The
Time appears with the Hour value flashing (Fig. 27).
• Press and release the Select (Side) button to advance
the Hour value in increments of one hour.
• Press the Advance (Front) button to accept the setting.
The Minute value flashes (Fig. 28),
• Press and release the Select (Side) button to advance
the Minute value in increments of one minute.
• Press the Advance (Front) button to accept the setting
and advance to Set Date, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 28 - Set Minute
Fig. 27 - Set Hour
To Next Page
Loading...
