34
TO SET - YEAR (while in the Surface Mode)
Factory set for the factory local Date, the Date can be set
to values between 01/01/01 and 12/31/20.
• After having set and accepted the Time of Day, the Date
appears with the graphic dAY, and Year value flashing
(Fig. 29).
• Press and release the Select (Side) button to advance
the Year value in increments of one year.
• Press the Advance (Front) button to accept the setting.
The Month value flashes (Fig. 30).
• Press and release the Select (Side) button to advance
the Month value in increments of one month.
• Press the Advance (Front) button to accept the setting.
The Day value flashes (Fig. 31).
• Press and release the Select (Side) button to advance
the Day value in increments of one day.
• Press the Advance (Front) button to accept the setting
and advance to Set Audible Alarm, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.
Fig. 29 - Set Year
Fig. 31 - Set Day
Fig. 30 - Set Month
To Next Page
Loading...
